In my opinion, the subject is everything. If you are not completely invested in the subject matter, it will be very difficult to complete the project.  

The cost should be considered as secondary to the subject. It is much better to spend more money and have an exciting project that holds our attention, than spending less money and seeing the project come to nothing. 

Of course one should not get involved with a project that is way out of budget, but there are always a number of alternatives to get through a part of your project. 

Choosing the right glue for the job is an expertise on its own. Even before choosing glue, a modeller needs to make sure the wood parts are free of dust and laser-cutting char. 

Basic yellow carpenter's glue will work with most wood models. Remember to make sure the model remains straight as planking is applied. 

For items other than wood, we recommend using two-part epoxies. They give you time to fit parts and dry completely clear. 

Remember, these are only brief recommendations. If you are not sure about something in one of our kits, just send us a note and we will be glad to assist. 

The nice thing about building large-scale boat models out of wood is that you really don't need specialized tools. Really, the only thing that you need, and that you probably don't have, are a ton of clamps. One can get away with few clamps, but the job takes longer. 

It is most likely that you already have most of the tools you might need. 

Absolutely! Most of our models started as a specific request from a builder. In some cases, the modeller owned a boat and they want a model of it. In others, they sailed on the boat. And in others, they may want a subject designed for a historical or scientific study. 

We design for CNC-cutting, laser-cutting, and 3D-printing, depending on the parts and the builder's requirements and skills. 

Designing a model can take as little as one or two weeks to several months, depending on the complexity of the model and the amount of information that is available. 

Well, that's really up to you. Typically, we divide the design into several phases. A seasoned builder may want just the set of frames for the hull and a cradle to hold the model during construction, once it's turned over. Another builder may want a deck, as well. Another may want to add deck structures and various small parts. 

Frame sets for a hull, for a model somewhere between 50 inches and 100 inches, will run you about $1000 USD. A complete package for a boat in those dimensions will run you about $2500 USD. 

Yes, we do have a complete workshop and can build an entire model for you. We take commissions for models of all kind, whether static, or remote-control. You will see several examples of models in the various pages on the website. 

For complex models of machines, engines, or vehicles, we have mechanical engineering experience, design the models in CAD software, and print out the parts on resin printers. Parts are then assembled and even incorporated into dioramas, if requested. 

Large-scale remote-control sailboats and powerboats are constructed in the traditional manner, with plank-on-frame construction. Accessories may be 3D printed.